Sporlan Liquid Line Solenoid Valve 3/8" ODF E3S130 24V w/ MKC-1 Coil

The Sporlan Solenoid Valve E3S130 is a high-performance component designed for use in refrigeration and air conditioning systems. Manufactured by Sporlan Valve Division, this valve is known for its reliable operation and durability in demanding environments. The E3S130 features a 3/8" ODF solder connection which allows for seamless integration into various piping systems. This connection type is widely recognized in the HVAC industry for providing strong and leak-free joints, essential for maintaining system efficiency. Operating at voltages of 24 volts and frequencies of 50-60 Hz, the valve is specifically designed for standard electrical systems used in commercial and residential applications. Its solenoid operation enables quick and precise control of refrigerant flow, making it an essential component for regulating pressures within the system. The valve's robust construction and design not only enhance performance but also ensure longevity, reducing the need for frequent replacements. Designed for easy maintenance, the E3S130 incorporates a simple assembly for faster service. Industry professionals trust Sporlan due to their commitment to quality and innovation, ensuring their products meet rigorous operational standards. The E3S130 is widely used in industrial refrigeration, supermarket refrigeration systems, and air conditioning units, reinforcing its versatility across different settings.

REFRIGERANT: R-22, R-134a, R-401A, R-402A, R-404A, R-407C, R-502 and R-507. THIS VALVE IS NOT RATED FOR R-410A. Read the model number carefully: this is an E3S130, with NO "-HP" suffix. The standard E series carries a maximum rated pressure of 500 psi (34.5 bar), and Sporlan does not list R-410A among its approved refrigerants. R-410A service requires the high-pressure "-HP" version of the valve. If you are working on an R-410A system, this is the wrong valve. Manufacturer: Sporlan Division, Parker Hannifin Corporation, Washington, Missouri, USA Model: E3S130 Valve series: E3 Type of operation: direct acting, hermetic. Not pilot operated. Direct acting construction is limited to valves with port sizes under 1/4 in. Normally closed: opens when the coil is energized, closes when de-energized Port size: 0.101 in (2.57 mm) Connections: 3/8 in ODF solder inlet x 3/8 in ODF solder outlet. Extended solder connections are standard on the E series, which means the valve can be brazed into the line without disassembly using low or no-silver brazing alloy. Maximum rated pressure: 500 psi (34.5 bar) Nominal liquid capacity on R-22, tons of refrigeration by pressure differential across the valve: 0.9 tons at 1 psi, 1.3 at 2 psi, 1.6 at 3 psi, 1.9 at 4 psi, 2.1 at 5 psi. Ratings are at 40 F (4.4 C) evaporating and 100 F (37.8 C) liquid. Coil: MKC-1, Class F temperature rating, 10 watts AC. Because the MKC-1 is Class F, a separate high temperature coil is NOT required for discharge gas service. Coil supplied on this unit: 24 V, 50/60 Hz. The 24 V coil is identified by orange lead wires. Body material: brass. Seating: synthetic to metal on the main port. Stem and plunger: stainless steel. Mounting: E3 series with mounting holes are not standard Approvals: UL File No. MH4576, CSA File No. LR19953, CE approved Model number decode: E for the extended-connection E series, 3 for the port size in thirty-seconds, S for solder connections, 1 for the MKC-1 coil size, 3 for the connection size in eighths of an inch (3/8 in), 0 for ODF x ODF. Note: the E3 and A3 have identical flow rates, so an E3 may be freely substituted for an A3. Installation note: Sporlan recommends a filter-drier ahead of every solenoid valve. Source: Parker Sporlan Bulletin 30-10, October 2022, pages 4, 8, 21, 22, 23, 25 and 28.